Pro-Ject Strobe It

Varenr.
980008354
Enhet
Stk
Lagerstatus:
Lager
Innkommende
Pris
kr 295

Informasjon fra produsent:


Control of turntable speed.  

 

FAQ

 

Question: How do I determine the correct speed with Strobe it?  

Answer: Strobe it shows circular arranged dashes that are assigned to speed and frequency. Please remember the ring that matches your desired speed and frequency (33 1/3 rpm with 50 Hz and 45 rpm with 50 Hz are valid for Europe). Put Strobe it on the turntable platter and start the turntable. The tonearm remains in its initial position. Align a mains powered light source directly to the turntable with Strobe it rotating. The dashes of the previously pinned ring should now give the impression to stand still. If they seem to move slightly forward or backwards, the speed is either too high or too low.  

 

Please note:  

Use normal mains operated lamps. Daylight, fluorescent lamps (energy saving lamps) as well as flashlights and LEDs, which are operated with direct current, are not suitable.  

Relaterte varer

Rega Spacer 2 mm
Rega Spacer 2 mm

Rega Spacer 2 mm

Pro-Ject Adjust It
Pro-Ject Adjust It

Pro-Ject Adjust It

Rega Spacer 2mm RB808/RP8
Rega Spacer 2mm RB808/RP8

Rega Spacer 2mm RB808/RP8

Pro-Ject Measure It II
Pro-Ject Measure It II

Pro-Ject Measure It II

Nyhetsbrev

Vær tidlig ute og få tilsendt info om nyheter og gode tilbud.